4
Creating Project Files—PLC to Devices
Siemens Energy & Automation, Inc.
25
Once you are finished entering data, select
Save
to save
your configuration, then select
Ok
to exit the dialog box.
Select
Revert
to bring back the previous settings.
4.9
Global Command Registers
This option allows you to specify global commands for all
the devices specified in the Device List. It is available only for
VDEW devices.
The Global Command Registers consist of six registers.
These registers allow the PLC to transmit commands to all
the devices in the Device List. To send a command, all the
PLC needs to do is to place the command values into the
appropriate PLC registers, which the DTU3005 unit reads
and then processes.
4.10
Device Diagnostic Registers
This option programs the DTU3005 to send communica-
tions diagnostic information to a set of registers on the PLC.
The information can be used to troubleshoot problems with
the devices and the communications network.
The format and content of the diagnostic registers are
described in detail in
Appendix F
.
1.
To configure the device diagnostic registers, select
Diagnostics
from the
Edit
menu. The following screen
displays:
2.
To enable the sending of diagnostic information to the
PLC, select the
Do you want device diagnostics
information sent to PLC?
checkbox with the mouse
or the
spacebar
. Then enter the starting register num-
ber in the
PLC Registers
: field. The register block is 6
bytes long. Be sure that the registers you specified are
not being used by other devices.
3.
Press
Shift+Tab
, or click the left mouse button to high-
light the
File
field and enter the file number. This
1372
L2,3,4 On : L1 Off
14
0
1
1
1
0
1373
L1 On : L2,3,4 Off
1
0
0
0
0
1
1374
L1,4 On : L2,3 Off
9
0
1
0
0
1
1375
L1,3 On : L2,4 Off
5
0
0
1
0
1
1376
L1,3,4 On : L2 Off
13
0
1
1
0
1
1377
L1,2 On : L3,4 Off
3
0
0
0
1
1
1378
L1,2,4 On : L3 Off
11
0
1
0
1
1
1379
L1,2,3 On : L4 Off
7
0
0
1
1
1
1380
L1,2,3,4 On
15
0
1
1
1
1
Table 4.1
7SJ600 Relay Information (Continued)
