Siemens DG10035E, Installation And Operating Instructions Manual

Page: 11 / 40

11
GB
Cleaning
■
Clean externally with a mild cleaning agent. Do not use
aggressive or abrasive detergents!
Maintenance/Customer Service
■
Repairs and other maintenance work may only be
carried out by one of our authorized customer service
representatives in order to avoid potential sources of
danger.
■
When you contact customer service, please quote the E
and FD numbers on your appliance (Fig. A).
■
The first inspection must be carried out no later than 2
years subsequent to initial startup of the appliance. This
involves inspection of the protection anode which may
need to be replaced, and the appliance may need to be
cleaned and descaled. The customer service will suggest
the next inspection date for a service.
■
The power supply and the water supply must be shut off
before all work on the appliance.
T e c h n i c a l d a t a
Rated capacity [l] 30 50 80 100
Rated voltage [V] 220–240 (~ 50Hz)
Rated output DGxxx35E
Rated output DGxxx35R
Rated output DGxxx35P [W]
1500
2000
2000
Rated current DGxxx35E
Rated current DGxxx35R
Rated current DGxxx35P [A]
6.5
8.7
8.7
Fuse protection [A] 10
Protection type/class IP24D
Rated over-pressure DGxxx35E
Rated over-pressure DGxxx35R
Rated over-pressure DGxxx35P [Mpa]
0.9
0.9
0.6
Cold and warm water connection G 1/2"
Corrosion prevention Magnesium protection anode
Warm water temperature range [°C] approx. 35–75
Frost protection [°C] approx. 10
Insulation thickness [mm] 45 40
Stand-by power consumption
at 65 °C
[kWh/d] 0.55 0.7 0.9 1.1
Mixed water quantities at 40 °C
(15 °C/65 °C)
[l] 54 90 144 180
Heating time (inlet 12 °C -> 60 °C)
DGxxx35E
DGxxx35R/DGxxx35P
[min] 68
51 114
85
182
137 228
171
Weight [filled] [kg] 49 70 107 131
Dimensions (H x W x D) [cm] 55 x 42 x 40 62 x 46 x 44 89 x 46 x 44 107 x 46 x 44