22
en
Water connection
The appliance is only approved for heating water
■
with a speciic electric resistance of ≥ 1 300 Ωcm
at 15 °C. Your water utility company can give you
information about the speciic water resistance.
Installation
Ensure the axial it of the connection pipes in the
■
nozzles.
Tighten the union nuts on the nozzles with an
■
open-end wrench and counter hold with a suit-
able open-end wrench.
The T-piece (for the pressurized connection)
■
and lexible connection hose are available
commercially.
Use an unpressurized tap for the unpressurized
■
connection, e. g. the tap available as a special
accessory (Single-lever mixer tap BZ13061,
Two handle ixture BZ13051).
Exchange the perlator from the tap ixture with
■
the supplied aerator to change the spray pattern
of the tap.
Controlling temperature
The supply temperature (probably lower in winter)
and pressure luctuations can inluence the tem-
perature of the water leaving the tap.
Turn the valve slowly in the closed direction for
■
higher temperatures (
F1
).
Add cold water for lower temperatures (
■
F2
).
F2
F1
F2
F1
pressurized (closed)
unpressurized (open)
Summary of Contents for DE04101
