Extensions: D992 mono
A26361-D992-Z121-2-7419
English - 13
Removing the Pentium II
Ê
If the Pentium II has a temperature sensor, pull out the associated cable.
Ê
Press the clamps (2) on either side of the Pentium II inwards and pull the Pentium II
up and out.
Ê
Insert the terminating board into the slot if necessary.
Installing the Pentium II
Ê
Remove the terminating board if necessary.
Ê
Place the Pentium II in the holder (B).
Ê
Push the Pentium II down in the holder and press it into the slot until the clamps (A)
to the left and right snap into place.
Ê
Set the clock frequency of the new Pentium II using switches 5 to 8 of the switch
block.
Ê
If the Pentium II has a temperature sensor, attach the associated cable to the
connector for the temperature sensor on the system board.
2
2
1
2
