Additional Options
24 - English
A26361-D992-Z121-2-7419
Display
[Ctrl]
[Ctrl]
[Ctrl]
[Ctrl]
+
[A]
[A]
[A]
[A]
Message During BIOS Initialization
This option determines whether the
Press <Ctrl> <A> for SCSISelect (TM) Utility!
message appears on your screen during system startup.
If this setting is disabled, you can still invoke the
SCSI Setup
by pressing
[Ctrl]
[Ctrl]
[Ctrl]
[Ctrl]
+
[A]
[A]
[A]
[A]
at
system startup.
Enabled
The message is displayed during startup (default entry).
Disabled
The message is not displayed during startup.
Multiple LUN Support
This option determines whether booting from a SCSI device that has multiple LUNs
(Logical Unit Numbers) is supported.
Enabled
The SCSI device will be used as the startup drive.
Disabled
The SCSI device will not be used as the startup drive (default entry).
BIOS Support for Bootable CD-ROM
This option determines for booting from a CD-ROM drive.
Enabled
It is possible to boot from the CD-ROM (default entry).
Disabled
It is not possible to boot from the CD-ROM.
BIOS Support for Int 13 Extensions
This option determines whether the SCSI BIOS supports disks with more than 1024
cylinders. The default setting is
Enabled
.
Enabled
Hard disk drives with more than 1024 cylinders are supported (default
entry).
Disabled
Hard disk drives with more than 1024 cylinders are not supported.
Support for Ultra SCSI Speed
This option determines whether the SCSI controller BIOS supports the fast transfer rate
40 Mbyte/s at 16-bit data transfer.
Enabled
40 Mbyte/s transfer rate is supported.
Disabled
The function is disabled (default entry).
i
Change the default setting if you have connected ultra-wide SCSI devices to
the SCSI controller.
