3
VDT Interface for the MXL
selected analog loop (m)
are displayed on the
VDT. They appear in the same format as they
appear in the List Sensitivity Settings print item in
the MXL menu (See
List Sensitivity Settings
in
the
MXL/MXLV Manual,
P/N 315-092036).
LAV m - List Analog (analog2) Voltage (LDO)
Use the LAV command for a listing of analog
voltages. At the command prompt, type LAV,
space, and the module number of the loop for
which the list is needed. Press ENTER. The
analog2 voltages for the individual smoke detec-
tors on the selected analog loop (m)
are dis-
played on the VDT in the same format as they
appear in the corresponding print item in the
MXL menu (See
List Voltages
in the
MXL/MXLV
Manual,
P/N 315-092036).
LTV m
-
List Threshold Voltage
Use the LTV command for a listing of threshold
voltages. At the command prompt, type LTV,
space, and the module number of the loop for
which the list is needed. Press ENTER. The
threshold voltages for the individual devices on
the selected analog loop (m)
are displayed on
the VDT in the same format as they are in the
corresponding print item in the MXL menu (See
List Voltages
in the
MXL/MXLV Manual,
P/N 315-
092036).
LSV m
-
List Sensitivity Voltages (LF)
Use the LSV command for a listing of sensitivity
voltages. At the command prompt, type LSV,
space, and the module number of the loop for
which the list is needed. The sensitivity voltages
for the individual devices on the selected analog
loop (m)
are displayed on the VDT in the same
format as they are in the corresponding print
item in the MXL menu (See
List Voltages
in the
MXL/MXLV Manual,
P/N 315-092036).
[Note that the XL3 command LF
m
(where
m
is
the network ALD-2 loop for which the voltage
listing is needed) is honored for users accus-
tomed to XL3 commands.]
LMT - List Module Type
Use the LMT command for a listing of module
types in the system. At the command prompt,
type LMT, then press ENTER. The types for all
modules in CSG-M are displayed on the VDT in
the same format as they are in the List Module
print item in the MXL menu (See
List Module
in
the
MXL/MXLV Manual,
P/N 315092036).
LDT m
-
List Device Type
Use the LDT command for a listing of device
types. At the command prompt, type LDT, space,
and the module number of the loop for which the
list is needed. Press ENTER. The types for the
individual devices on the selected analog loop
(m)
,
as programmed in CSG-M, are displayed on
the VDT in the same format as they are in the
List Device print item in the MXL menu (See
List
Device
in the
MXL/MXLV Manual,
P/N 315-
092036).
LMS m - List Messages (LM)
Use the LMS command for a listing of device
messages. At the command prompt, type LMS,
space, and the module number of the loop for
which the list is needed. Press ENTER. The
custom messages for each device on the se-
lected analog loop (m)
are displayed on the VDT
in the same format as they are in the List Mes-
sage print item in the MXL menu (See
List
Message
in the
MXL/MXLV Manual,
P/N 315-
092036).
[Note that the XL3 command LM
m
(where
m
is
the network ALD-2 loop for which the listing is
needed) is honored for users accustomed to
XL3 commands.]
LSW - List Software Versions
Use the LSW command for a listing of MXL
software version information. At the command
prompt, type LSW and press ENTER. A
time and
date stamped report containing the system
custom message, MXL and CSG-M version,
CSG-M source date, and the CSG-M load time
and date displays on the VDT in the same format
as in the List Software Version print item of the
MXL menu (See
List Software Version
in the
MXL/MXLV Manual,
P/N 315-092036).
Technical Manuals Online! - http://www.tech-man.com
firealarmresources.com
