VDT Interface for the MXL
2
When Individual Acknowledge is selected in
the CSG-M,
it acknowledges the most recent
unacknowledged event in that event queue. Note
that the acknowledgment is printed on the VDT
as it would be on the printer.
SUA - Silence/Unsilence Audibles
The SUA command toggles the state of the
systems silenceable audibles.
CRS - Reset the MXL (CR)
When all events are acknowledged, all audibles
are silenced, all queue information is printed, and
the Control Reset command is issued, the MXL
resets just as if it had been reset from the MKB.
(Note that the XL3 command CR is honored for
users accustomed to XL3 commands.)
Entering the LIST Commands from
the VDT
The List commands give an identical output to
the printouts obtained from the MXL menu using
the PRINT key. Those commands are listed and
described below.
Note that some of the commands include the
notations
m, m-d,
etc. Replace these notations
with the information given in the command
description. When entering module or device
number information, leading zeros are NOT
required.
Separate the data fields (i.e., mod-
ule, device, arm, etc.) with either a space, a
hyphen, or a comma.
LST - List Status (LS)
Use the LST command for a listing of the current
MXL status. At the command prompt, type LST
followed by ENTER. A
time and date stamped
status summary prints a listing similar to the
following:
System Status at 12:12:12 Dec 12, 2012 :
0 ALARM
0 ALARM ACK
0 SUPERV
0 SUPERV ACK
0 TROUBLE
0 TROUBLE ACK
0 SECURTY
0 SECURTY ACK
(Note that the XL3 command LS is honored for
users accustomed to XL3 commands.)
LAL - List Alarms (LA)
Use the LAL command for a listing of current
alarms. At the command prompt, type LAL
followed by ENTER. The events in the alarm
queue are displayed on the VDT in the same
format as the list alarms print item in the MXL
menu
(See List Alarm
in the
MXL/MXLV Manual,
P/N 315-092036).
(Note that the XL3 command LA is honored for
users accustomed to XL3 commands.)
LSP - List Supervisory
Use the LSP command for a listing of current
supervisory events. At the command prompt,
type LSP followed by ENTER. The events in the
supervisory queue display on the VDT in the
same format as the List Supervisory print item in
the MXL menu (See
List Supervisory
in the
MXL/
MXLV Manual,
P/N 315-092036).
LTR - List Trouble (LT)
Use the LTR command for a listing of current
troubles. At the command prompt, type LTR
followed
by
ENTER. The events in the trouble
queue display on the VDT in the same format as
the List Trouble print item in the MXL menu (See
List Trouble
in the
MXL/MXLV Manual,
P/N 315-
092036).
(Note that the XL3 command LT is honored for
users accustomed to XL3 commands.)
LSC - List Security
Use the LSC command for a listing of current
security events. At the command prompt, type
LSC followed by ENTER. The events in the
security queue display on the VDT in the same
format as the List Security print item in the MXL
menu (See
List Security
in the
MXL/MXLV
Manual,
P/N 315-092036).
LSS m
-
List Sensitivity Settings
Use the LSS command for a listing of sensitivi-
ties. At the command prompt, type LSS, space,
and the module number of the loop for which the
list is needed. Press ENTER. The sensitivity
settings for the individual smoke detectors on the
Technical Manuals Online! - http://www.tech-man.com
firealarmresources.com
