9
Step 1: Assemble the Meter
1.
Insert the Options Card in the slot at the back of the meter, then firmly
slide the card up and into place.
2.
Insert the power supply’s plug-in connector into the meter’s plug-in port.
3.
Attach the power supply by tightening the captive screws using a #1
Phillips screwdriver. Do not overtighten.
N
OTE
If your display screen only shows 0 (zero) Frequency, the Options Card is not
inserted correctly. Remove the card and re-insert.
Step 2: Mount the Meter
Mount the meter in a dry location free from dirt and corrosive vapors. Once
installed, no cleaning of the device is necessary.
Environmental Conditions
Back of Meter
Back of
Power Supply
Options Card
Plug-in Port
Plug-in Connector
Captive Screw
Captive Screw
Operation Range
-20ºC to 70ºC (-4ºF to 158ºF)
ambient
air, no ice formation.
Maximum 50ºC (122ºF) with 480 V
power supply.
Storage Range
-40°C to 85°C (-40°F to 185°F)
Humidity
5% to 95% non-condensing
