24
Button Functions in Configuration Select Mode
Configuration Edit mode: edit a displayed parameter by pressing the Enter
button. The parameter digit, value, or decimal point flashes (the meter
automatically determines which option to flash for editing, depending on the
parameter). With the Up or Down button, you can increase/decrease the digit
value, move the decimal point, or select a value from a pre-programmed list.
After editing, press the Enter button to set the value.
Button Functions in Configuration Edit Mode
Password Security
A front panel password is required for the first parameter you configure during
an editing session. Once you have entered a valid password, you can configure
multiple parameters. The default password is 0 (zero).
Mode
Button
Function
Configuration Select Mode
ENTER Configuration Select mode
by pressing the Up and Down
buttons at the same time and
holding for 2 seconds.
EXIT Configuration Select mode
with the same button sequence.
Move to the previous parameter
configuration screen.
Move to the next parameter configuration
screen.
Enter Configuration Edit mode to configure
the displayed parameter value.
Mode
Button
Function
Configuration Edit
Mode
ENTER
Configuration Edit
mode from
Configuration
Select mode by
pressing the Enter
button.
EXIT
Configuration Edit
mode by pressing
the Up and Down
buttons at the
same time and
holding for 2
seconds.
Flashing Digit: Increase the number.
Flashing Value: View the previous list value.
Flashing Decimal Point: Move the decimal point to the
right.
Flashing Digit: Decrease the number.
Flashing Value: Display the next list value.
Flashing Decimal Point: Move the decimal point to the
left.
Press and
hold for 2
seconds.
Flashing Digit: Move the position of the cursor to the
right.
Flashing Decimal Point: Set the new decimal point
location.
Press and
hold for 2
seconds.
Flashing Digit: Move the position of the cursor to the left.
Flashing Decimal Point: Set the new decimal point
location.
Program the edited parameter to the meter; the meter
automatically returns to Configuration Select mode.
