2
Revision 04 * INSTALLATION AND OPERATING INSTRUCTIONS 8BT2 * 881-4027.9
About these Instructions
These instructions do not purport to cover all details or
variations in equipment, nor to provide for every possible
contingency to be met in connection with installation or
operation.
For details about technical design and equipment like
e.g. technical data, secondary equipment, circuit
diagrams, please refer to the order documents.
The switchgear is subject to continuous technical
development within the scope of technical progress. If
not stated otherwise on the individual pages of these
instructions, we reserve the right to modify the specified
values and drawings. All dimensions are given in mm.
For further details, e.g. about additional equipment and
information about other switchgear types, please refer
to catalog HA 26.41.
Should further information be desired or should
particular problems arise which are not covered
sufficiently by these instructions, the matter should be
referred to the competent Siemens department.
The contents of this instruction manual shall not become
part of or modify any prior or existing agreement,
commitment or relationship. The Sales Contract
contains the entire obligations of Siemens. The warranty
contained in the contract between the parties is the sole
warranty of Siemens. Any statements contained herein
do not create new warranties or modify the existing
warranty.