Page 38 from 52
Active Mini-Starcoupler
14.01.2002
is sent by the Master-port to the modem, when no active port is switched
(normal operation mode). PING should be selected only for the Master-
interface connected to the modem.
As a summery the settings are shown in a table overview:
Interface Chan. Baud
Data
TimeOut
Light Ping Answ.
1
0
9600 8E1
05:00:00
NO
NO
YES
2
0
9600 8E1
05:00:00
NO
NO
YES
3
-
9600 8N2
05:00:00
NO
-
-
4
-
9600 8N2
05:00:00
NO
-
-
5
-
1200 8N2
05:00:00
NO
-
-
6 (RS485)
0
9600 8E1
05:00:00
NO
YES
7 (RS232)
0
9600 8E1
05:00:00
NO
YES
8 Back to Main Menu
With entry of ´8´ the main setting dialogue appears, where you can save
the parameters (4) or terminate the setting dialogue (5).
Channels 1 (0) 2 (0) 6 (0) 7 (0)
1 Bediensprache Deutsch
2 Show/Change Current Settings
3 Set Default Settings
4 Save Parameter
5 Quit Configuration Mode
6.3.4 Saving
parameters
The parameters which have been set are stored through the entry of ´
4
´
into the E2PROM of the device. The are available also after a loss of
auxiliary power supply voltage. If the saving of the parameters fail the
device indicates it in the terminal window with:
Parameter NOT Saved
6.3.5
Termination of the Setting mode
Selecting ´
5
´ terminates the setting mode.
At the Master-ports the string
(2100)BYE(2100)<Return>(2100)
REMOTE>
is transmitted with the parametrized interface parameters (here: 8E1,
9600 Baud)
Note:
(2100)
is the duration between the character ´
E
` and <Return>
Summary of Contents for 7XV5550-0xA00 Series
Page 1: ...Active Mini Starcoupler 7XV5550 0xA00 Manual Jan 2002 ...
Page 2: ......
