Siemens 7SG23 MSCDN - MP2A Manual Download Page 16 | Manualshive

Page: 16 / 82

background image

MSCDN – MP2A Performance Specification

The copyright and other intellectual property rights in this document, and in any model or article produced from it
(and including any registered or unregistered design rights) are the property of Siemens Protection Devices
Limited. No part of this document shall be reproduced or modified or stored in another form, in any data retrieval
system, without the permission of Siemens Protection Devices Limited, nor shall any model or article be
reproduced from this document unless Siemens Protection Devices Limited consent.

While the information and guidance given in this document is believed to be correct, no liability shall be accepted
for any loss or damage caused by any error or omission, whether such error or omission is the result of
negligence or any other cause. Any and all such liability is disclaimed.

©2011 Siemens Protection Devices Limited

MSCDN – MP2A

Capacitor unbalance protection

Document Release History

This document is issue 2011/10. The list of revisions up to and including this issue is:
Pre release

2011/10

Reference to 60Hz removed

2010/02

Document reformat due to rebrand

12/10/2004 R9 AC Voltage Input ratings added

VT Supervision function added
Status input minimum operate current corrected
Corrected operating time variation over frequency

28/02/2003 R8 IDMTL picks up at 105% of setting.

Three DTL elements are now available for Capacitor Unbalance

18/02/2003  R7 IDMTL O/C & E/F minimum operate time corrected
14/02/2003  R6 Operate time claims added for O/C and O/V elements
13/02/2003  R5 Removed incorrect references to drop-off timers on the status inputs.
10/02/2003  R4 All MP1 DO changed to

≥

80%

Cx Unbalance Accuracy changed to ± 5% of setting or ± 0.01 I

n

21/01/2003 R3 Corrected element names

Added 59DT element

27/11/2002 R2 Resistor thermal overload characteristics added

Resistor open circuit characteristics added

24/10/2002 R1 Revision History Added.

Software Revision History

26/02/2006 2621H80002R9

«
...
14
15
16
17
18
...
»

Summary of Contents for 7SG23 MSCDN - MP2A



















































































Reviews:

No comments

Related manuals for 7SG23 MSCDN - MP2A

Brand: Marantz Pages: 8

EP5 Sonic Defenders Max

Brand: Superfire Pages: 2

Brand: GE Multilin Pages: 544

Brand: Magnavox Pages: 60

Brand: Arcteq Pages: 359

Versaflo S Series

Brand: 3M Pages: 101

Brand: SafeWaze Pages: 2

Brand: Eaton Pages: 44

ACO Quatrix-K 620368

Brand: ACO Haustechnik Pages: 32

Brand: Delta-Opti Pages: 2

Brand: Chamberlain Pages: 16

Brand: MAVIG Pages: 20

Brand: PSP Pages: 2

BatteryProtect 48/100

Brand: Victron energy Pages: 5

GLOBBER 529-001

Brand: TEMPLAR Pages: 68

vigilec zero V1Z

Brand: toscano Pages: 60

I2R SuperHy 120

Brand: Transtector Pages: 2

Brand: SIFANG Pages: 64

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands