2.5
Interface test
The analog, digital and serial interfaces between the drive and higher-level control on the
customer side are checked. The interface test can only be ordered and performed together with
the function acceptance.
During the tests, the drive is only supplied with auxiliary voltage.
Interface test
Order codes
Without the
customer
present
With the cus‐
tomer
present
● Ethernet communication
● Signals to the customer's system
● Signals between the drive and cooling unit, if available
● Additional interfaces
-
F79
The test is confirmed in a 3.1 certificate – or in the case that the customer has ordered the
acceptance test, in a 3.2 certificate.
General scope of services
2.5 Interface test
SINAMICS SL150 6SL3860 F03 F70 F98 F79 F76
Reference Manual Rev.201902141425 SL150 luftgekühlt
15
