Typical configuration
The following figure shows the typical configuration of a bus link with a Compact FF Link when
the front doors are open.
0RXQWLQJUDLO
&RPSDFW
))/LQN
36
/
0
/
0
0/
Figure 5-1
Configuration of the bus link for single-channel operation
Installing the bus link with a Compact FF Link
1. Hook the Compact FF Link into the mounting rail "for standard configuration" and swing it
downward.
2. Screw the Compact FF Link into place.
Removing the bus link
To remove the bus link, follow the same procedure in reverse order.
If the bus link is already in operation, switch off the power supplies before you remove it.
See also
Accessories for PROFIBUS DP (Page 89)
Accessories for FOUNDATION Fieldbus (Page 90)
Mounting
5.3 Installing the Compact FF Link
Compact FF Link
Operating Instructions, 03/2015, A5E35651552-AA
27