Siemens 3TL81 Operating Instructions Manual Download Page 3

3

3ZX1812-TL80-0AN7 / 9229 9870 174 0G
2003-03-12

Description

Beschreibung

Anwendungsbereich

Die Vakuum-Hochspannungsschütze sind Schaltgeräte mit
elektromagnetischem Antrieb für hohe Schalthäufigkeit und
unbegrenzter Einschaltdauer.

Der Magnetantrieb kann mit Wechsel- oder Gleichstrom
betätigt werden.

Das Vakuumschütz eignet sich zum betriebsmäßigen Schal-
ten von Wechselstromkreisen jeder Art, z.B. Drehstrommo-
toren, Transformatoren, Kondensatoren, Widerstandsver-
brauchern und zum Wendebetrieb von Motoren.

Die Vakuumschütze 3TL81 haben einen Abreißstrom von
nur 0,6 A und sind insbesondere zum Schalten von indukti-
ven Vebrauchern geeignet.

Die Vakuumschütze werden in offener Ausführung in Schutz-
art IP 00 nach DIN/VDE 0470 Teil 1 und IEC 144 gebaut.

Sie sind einsetzbar in Gebäuden mit geringer Wärmeisola-
tion oder geringer Wärmekapazität, geheizt oder gekühlt,
ohne Temperaturüberwachung. Heizung oder Kühlung kann
über mehrere Tage ausfallen.

Gelegentliche Betauung von ca. 1x pro Monat für 2 Stunden
ist zulässig.

Die Vakuumchütze erfüllen entsprechend IEC 721, Teil 3.3,
1990 folgende Umweltbedingungen:

1. Klimatische Umweltbedingungen

Klasse 3K4

1)

oder 3K6

2)

,

3Z2, 3Z5

2. Biologische Umweltbedingungen

Klasse 3B1

3. Chemisch-aktive Stoffe

Klasse 3C2

3)

4. Mechanisch-aktive Stoffe

Klasse  3S2

4)

5. Mechanische Umweltbedingungen

Klasse 3M2

Application

High-voltage vacuum contactors are switching devices with
solenoid-operated mechanisms suitable for high switching
frequencies and unlimited ON duration.

The solenoid-operated mechanism is suitable for AC or DC
duty.

The vacuum contactors are suitable for normal switching
operations in AC circuits of any type, e.g. three-phase mo-
tors, transformers, capacitors and resistive loads and for
motor reversal duty.

The 3TL81 vacuum contactors have a chopping current of
only 0,6 A and are thus  particularly suitable for switching
inductive loads.

The vacuum contactors are of the non-enclosed type, de-
gree of protection IP 00 to DIN/VDE 0470 part 1 and IEC 144.

They are suitable for use in buildings with poor thermal
insulation or low thermal capacity, heated or cooled, without
temperature monitoring; heating or cooling may even fail for
several days.

Condensation about once a month for 2 hours is permissi-
ble.

The vacuum contactors satisfy the following environmental
conditions in accordance with IEC 721, Part 3-3, 1990:

1. Climatic environmental conditions

Category 3K4

1)

or 3K6

2)

3Z2, 3Z5

2. Biological environmental conditions Category 3B1

3. Chemically-active substances

Category 3C2

3)

4. Mechanically-active substances

Category 3S2

4)

5. Mechanical enviromental conditions Categry 3M2

1)

Untere Temperaturgrenze -25 °C

2)

Ohne Eisbildung und windgetriebenen Niederschlag

3)

Ohne Auftreten von Salznebel bei gleichzeitiger Betauung

4)

Einschränkung laut Betriebsanleitung: Saubere Isolierteile

1)

Lower temperature limit  -25 °C

2)

Without formation of ice and wind-related precipitation

3)

Without occurence of saline fog with simultaneous moisture condensation

4)

Restriction as per operating instructions: clean insulators

Summary of Contents for 3TL81





















Reviews: