TC45 AT Command Set
12.2 AT+CMGC
s
m
obile
TC45_ATC_V02.02
Page 298 of 461
4/16/04
Confidential / Released
12.2
AT+CMGC Send an SMS command
Syntax
Notes
• After invoking the commands
it is necessary to wait for the prompt ">"
before entering text or PDU. After the prompt a timer will be started to observe the input.
• At baudrates below 19200 it is recommended to use the line termination character only (refer to
, default
<CR>
) before entering the text or PDU. Use of the line termination character followed by the response format-
ting character (refer to
, default
<LF>
can cause problems
Test Command
AT+CMGC=?
Response(s)
OK
Write Command
If text mode (see
=1)
AT+CMGC=
[,
]]]]
<CR>
Text can be entered
<CTRL-Z>
/
<ESC>
Response(s)
+CMGC:
If sending fails
ERROR
+CMS ERROR
Write Command
If PDU mode (see
=0)
AT+CMGC=
PDU can be entered
<CTRL-Z>
/
<ESC>
Response(s)
+CMGC:
OK
If sending fails
ERROR
+CMS ERROR
PIN
ASC0
ASC1
MUX1
MUX2
MUX3
%
%
%
%
%
%
Reference(s)
GSM 07.05