Siemens Mobile TC45 Manual Download Page 275

Page: 275 / 461

TC45 AT Command Set

11.10 AT+FDFFC

obile

TC45_ATC_V02.02

Page 275 of 461

4/16/04

Confidential / Released

11.10

AT+FDFFC Data Compression Format Conversion

Syntax

Command Description

This parameter determines the ME response to a mismatch between the data format negotiated for the fax ses-
sion, reported by the

<df>

subparameter, and the Phase C data desired by the controlling application, indicated

by the optional

subparameter, or the

subparameter for

operation.

Parameter Description

[0]

Mismatch checking is always disabled. The controlling application has to check
the

<df>

subparameter and transfer matching data.

Notes

• For further information see

AT+FDIS

• Used for Fax Class 2 only.

Test Command

AT+FDFFC=?

Response(s)

(list of

<df>

Read Command

AT+FDFFC?

Response(s)

<df>

Write Command

AT+FDFFC=

<df>

Response(s)

ASC0

ASC1

MUX1

MUX2

MUX3

Reference(s)

EIA PN-2388

<df>

(num)

Summary of Contents for TC45














































































































































































































































































































































































































































































Search results

Summary of Contents for TC45

Reviews:

Brands by name

Popular brands

Siemens Mobile TC45, Manual

Search results

Summary of Contents for TC45

Reviews:

Brands by name

Popular brands