Siemens Mobile TC45, Manual

Page: 16 / 461

TC45 AT Command Set
1.3 Document conventions
s
m
obile
TC45_ATC_V02.02 Page 16 of 461 4/16/04
Confidential / Released
1.3.2 Superscript notation for parameters and values
Table 1.1: Symbols used to mark the type of parameters
Table 1.2: Symbols used to indicate the correlations with other commands
Table 1.3: Symbols used to mark different types of default values of parameters
Parameter type Meaning
<param>
(num)
Parameter value must be numeric type
<param>
(str)
Parameter value must be string type
Parameter option Meaning
<param>
(&W)
Parameter value will be stored with
AT&W
<param>
(&V)
Parameter value will be displayed with
AT&V
<param>
(ˆSNFW)
Parameter value will be stored with
AT^SNFW
<param>
(+CSCS)
Parameter value has to be (is) coded according to current setting of
<chset>
(see
AT+CSCS
for details)
Value option Meaning
[x] Default value: if the parameter is omitted, the value 'x' will be assumed
x
(&F)
Factory default value, will be restored to 'x' with
AT&F
x
(P)
Powerup default value of a parameter which is not stored at power down
x
(D)
Delivery default value of a parameter which cannot be restored automatically