H39.MFVRS009EN-00
02.2019
55
/
64
Assembly instructions
Multi-point locks, key operated
BS 6000 OF/OR, BS 6000, BS 6600
6.3
Adjustment of bottom bushing
The adjustment is corrected by -1 to +2 mm via a removable adjustment piece
[1]. This adjustment changes the contact pressure of the door on the frame
seal.
1
If the contact pressure of the door
on the frame seal is too low, the G
adjustment piece must be moved
to +1 or +2 mm.
If the contact pressure of the door
on the frame seal is too high, the
adjustment piece must be moved
to - (-1 mm).
At Null, the adjustment piece is in
neutral position.
The maximum adjustability is rea-
ched by turning twice by 90° in an
anticlockwise direction or once by
90 ° in a clockwise direction.
2 x
f
Close the door and lock with
a double turn.
f
The conical locking element
moved into the adjustment
piece and laterally presses
the door against the seal.
