![background image](http://html.mh-extra.com/html/sick/tdc-e/tdc-e_operating-instructions-manual_1264338028.webp)
5
ELECTRICAL INSTALLATION
28
8027311 / V1-0/2022-04|SICK
O P E R A T I N G I N S T R U C T I O N S | TDC-E (Telematic Data Collector)
Subject to change without notice
5.4
Connecting antennas
Fig. 21: Connecting antennas
Legend
1
WLAN antenna
2
LTE antenna
3
GPS antenna
•
The LTE and WLAN antennas are not mounted at the factory.
•
They must be screwed on before commissioning the devices.
▸
Hold the device firmly with one hand.
▸
Attach the antenna to the relevant SMA antenna connection on the TDC-E.
▸
Screw the antenna onto the device antenna connection by turning it clockwise.
▸
Lay the connecting cable properly in the vehicle depending on the installation location
of the antenna.
▸
Plug the Cinch male connector at the end of the connecting cable into the MCX female
connector on the TDC-E.
Screwing on
GSM / WLAN antenna
Connecting a
GPS antenna