1
About this document
1.1
Purpose of this document
These operating instructions contain the information required during the life cycle of the
safety system. This document describes:
•
The individual components
•
The project planning
•
The mounting and electrical installation, insofar as special measures are neces‐
sary for the safety system
•
The configuration
•
The necessary thorough checks
•
The commissioning
•
The maintenance
•
The troubleshooting
1.2
Scope
These operating instructions contain information regarding the Safe Entry Exit safety
system.
NOTICE
The operating instructions of the components also apply. In the event of contradictions
between the operating instructions, the information specified in the operating instruc‐
tions for the safety system applies.
The relevant information must be made available to the employees for all work per‐
formed on the safety system.
The following documents contain information about the possible components of the
Safe Entry Exit:
Table 1: Available documents
Document type
Title
Part number
Operating instructions
Flexi Soft Modular Safety Controller
Hardware
8012999
Operating instructions
Flexi Soft in the Flexi Soft Designer
software
8012998
Operating instructions
deTec4 Prime
8017724
Operating instructions
deTec4 Core
8014251
Operating instructions
miniTwin4
8012731
Operating instructions
C4000 Standard
8009855
Operating instructions
C4000 Standard ATEX II 3G/3D
8013551
Operating instructions
C4000 Advanced
8009855
Operating instructions
C4000 Advanced Ex
8017105
Operating instructions
C4000 Advanced ATEX II 3G/3D
8013551
Operating instructions
C4000 Select
8012198
Operating instructions
C4000 Select Ex
8017106
Operating instructions
M4000 Advanced Curtain
8010794
Operating instructions
deTec4 Core IP69K
8021546
Operating instructions
deTec4 Core Ex
8017107
Operating instructions
deTem4 Core
8020445
1
ABOUT THIS DOCUMENT
6
O P E R A T I N G I N S T R U C T I O N S | Safe Entry Exit
8021675/ZV26/2019-05-13 | SICK
Subject to change without notice