Figure 10: RFH505/515: required overrun of the active cap (blue) when mounting the device in
metal (non-flush installation)
RFH515
Figure 11: RFH515/515: recommended overrun of the active head when mounting the device in
metal: about 10 mm (non-flush installation)
Figure 12: RFH515: recommended overrun of the active head when mounting the device on
metal: about 10 mm
Basic allocation of the transponder to the device
HF transponders have coil antennas and therefore preferential directions within the
radiation field of the antenna. The possible read and write range is lower or higher
depending on the alignment of the transponder antenna to the antenna surface of the
device.
5
MOUNTING
28
O P E R A T I N G I N S T R U C T I O N S | RFH5xx
8025309//2020-12-08 | SICK
Subject to change without notice