SICK ReLy TIME1, Operating Instructions Manual

Page: 32 / 40

Rated insulation voltage
At altitudes up to 2,000 m above sea level 230 V AC
At altitudes 2,000 m above sea level …
4,000 m above sea level 150 V AC
Overvoltage category III
Contamination rating 2
Rated impulse withstand voltage U
imp
6 kV
1)) Time the enabling current paths of the safety relay remain open before closing again.
Table 14: Electrical data - enabling current path, release-delayed (37, 38)
Utilization category DC-13 (0,1 Hz): 24 V, 2 A (IEC 60947-5-1)
Number of release-delayed enabling current
paths (normally open) 1
Switching voltage 10 V DC … 30 V DC
Switching current 2 mA … 2 A, see figure 13, page 33 , see
figure 15, page 34
DC switching capacity 0.02 W … 70 W, see figure 13, page 33
Switching frequency ≤ 1 Hz depending on the release delay
Contact fuse with safety fuse gG or circuit
breaker C Max. 2 A
1)) Time the enabling current paths of the safety relay remain open before closing again.
Table 15: Ambient data
Enclosure rating IP20 (IEC 60529)
Ambient operating temperature
At altitudes up to 2,000 m above sea level
(UL/CSA: surrounding air temperature) –25 °C … +55 °C
At altitudes 2,000 m above sea level …
3,000 m above sea level –25 °C to 50 °C
At altitudes 3,000 m above sea level …
4,000 m above sea level –25 °C … +45 °C
Storage temperature –25 °C … +70 °C
Permissible operating height ≤ 4,000 m
Air humidity 10% … 95%, non-condensing for climatic con‐
ditions according to IEC 61131-2
Emitted interference In accordance with IEC 61000-6-4
Immunity to interference In accordance with IEC 61326-3-1
In accordance with IEC 61000-6-2
In accordance with IEC 60947-5-1
11
TECHNICAL DATA
32 O P E R A T I N G I N S T R U C T I O N S | ReLy TIME1 8024303/2019-12-18 | SICK
Subject to change without notice