Prerequisites
•
The supply voltage is switched off.
•
Required tools are available.
Auxiliary equipment required
°
Cleaning sticks,
°
Soft, lint-free cloth
°
Ethanol
°
If necessary, pressurized can or bellows
°
Gloves if necessary
Approach
1.
At the device end of the optical fiber: Remove the protective caps from the fiber
ends.
2.
At the device end of the optical fiber: Clean the fiber end with the cleaning rod.
3.
Insert the white end of the cleaning rod into the fiber junction box on the control
unit.
4.
Rotate the cleaning rod once around its axis.
5.
Remove the cleaning rod.
6.
At the measuring head end of the optical fiber: Remove dust with a clean, grease-
free and dry gas from a pressurized can or bellows.
7.
At the measuring head end of the optical fiber: Clean grease from the fiber end
with a lint-free cloth moistened with ethanol.
9
MAINTENANCE
48
O P E R A T I N G I N S T R U C T I O N S | OD7000
8027188//2022-05-25 | SICK
Subject to change without notice
