5
Mounting
5.1
Mounting instructions
•
Observe the technical data.
•
Protect the sensor from direct sunlight.
•
To prevent condensation, avoid exposing the device to rapid changes in tempera‐
ture.
•
The mounting site has to be designed for the weight of the device.
•
Observe ambient temperature and air humidity,
.
•
Do not cover air holes on top and bottom of device.
•
Do not stack devices on top of each other.
•
Mount the device in a dry, dust-free location.
•
To ensure air circulation, maintain minimum distances,
•
To prevent fluctuations in measured values, make sure that the device and the
measured object are not exposed to vibrations when measuring distances. This
effect is negligible for coating thickness measurements.
5.2
Working distance and measuring range
1
Working distance
2
Measuring range
5.3
Installation types
Installation type
Illustration
Note
Desktop device
The thread on the under‐
side of the device is used
for optional tightening.
5
MOUNTING
24
O P E R A T I N G I N S T R U C T I O N S | OD7000
8027188//2022-05-25 | SICK
Subject to change without notice
