53
8018478/YWL5/2018-06| SICK
O P E R A T I N G I N S T R U C T I O N S | NAV245
Subject to change without notice
MOUNTING
5
5.3.1
Direct mounting
The NAV245 has four M5 × 8 threaded holes on the rear. They can be used to mount the
NAV245 directly on the intended mounting surface. To prevent possible oscillations, the
reference plane located on the rear can be used at a third support point if necessary (1).
Fig. 45: Direct mounting
Important
Please observe the dimensional drawings during mounting (
).
5.3.2
Mounting with mounting kit 1a
You can use mounting kit 1 to mount the NAV245 on a mounting surface (wall, machine).
The mounting kit is available as mounting kit 1a without a protective device for the optical
cover and as mounting kit 1b with a protective device for the optical cover.
Fig. 46: Mounting with mounting kit 1a
M5×8
M5×8 threaded holes
Fixing screws
Fixing screws
Mounting kit 1a
