![background image](http://html1.mh-extra.com/html/sick/minitwin2/minitwin2_original-instructions-manual_1264672061.webp)
Operating Instructions
Chapter
7
miniTwin2
8013482/YT85/2016-02-23
© SICK AG • Industrial Safety Systems • Germany • All rights reserved
61
Subject to change without notice
Care and maintenance
7
Care and maintenance
The miniTwin2 safety light curtain is maintenance-free. The front screen on the miniTwin2
safety light curtain should however be regularly cleaned and also if contaminated.
Do not use aggressive cleaning agents.
Do not use abrasive cleaning agents.
Static charges cause dust particles to be attracted to the front screen. You can reduce this
effect by using the antistatic plastic cleaner (SICK part number 5600006) and the SICK
lens cloth (part number 4003353).
How to clean the front screen:
Use a clean and soft brush to remove dust from the front screen.
Now wipe the front screen with a clean and damp cloth.
After cleaning, check the position of the miniTwin2 to ensure that the protective device
cannot be bypassed (reaching over, under or standing behind).
Check the effectiveness of the protective device as described in section 6.7 “Test
notes” on page 56.
Note
Note