4
Mounting
4.1
Scope of delivery
•
Device in the version ordered
•
Quickstart
•
Safety notes
The fibers are not included in the scope of delivery.
4.2
Mounting requirements
•
Typical space requirement for the device, see type-specific dimensional drawing,
•
Comply with technical data, such as the permitted ambient conditions for opera‐
tion of the device (e.g., temperature range, EMC interference emissions, ground
potential).
•
To prevent condensation, avoid exposing the device to rapid changes in tempera‐
ture.
•
Protect the device from direct sunlight.
•
Shock and vibration-free mounting.
4.3
Connecting fibers
2
3
1
Figure 3: Connecting fibers
1
Fiber interlocking
2
Fiber opening
3
Sender/receiver designation
1.
Open fiber interlocking
1
.
2.
Insert the fibers into the provided openings
2
as far as they will go, about 15 mm.
Check the sender/receiver designation
3
while you are doing this.
3.
Close the optical fiber interlocking.
NOTICE
When using a pushbutton variant with coaxial fiber arrangement, connect the core fiber
or fiber marked in white to the sender. Connect the second fiber to the receiver.
4
MOUNTING
12
O P E R A T I N G I N S T R U C T I O N S | KTL180
8023304.11XV/2018-11-29 | SICK
Subject to change without notice
