Operating the device
32
© SICK AG • Subject to change without notice • 8016441/2013-11-22
8 Operating the device
ATTENTION
Pushbutton damage due to improper handling.
Improper handling of the pushbuttons can damage them.
This will make operation difficult or impossible.
For this reason:
• Only operate the pushbuttons with your fingers or a
suitable pointing device.
• Do not operate the pushbuttons using sharp or hard
objects.
8.1
Displaying the received signal level
As soon as voltage is supplied to the device, the signal level is indicated on
the display.
8.2
Selecting parameters
You can select a menu, parameter, or option using the
,
, and
pushbuttons. The menu path is specified in the relevant chapters.
→
For the overall menu structure, see Page 47, Chapter 13.
8.3
Selecting options
1. Select the desired parameter using the
and
pushbuttons.
2. Select the desired option using the
or
pushbutton.
3. Perform one of the following steps:
• Press the
pushbutton to save the change.
• Press the
pushbutton to cancel the process. The parameter
name is displayed again.
4. Perform one of the following steps to return to the level indicator:
• Press the
pushbutton repeatedly until the received signal level is
displayed once more.
• Wait for approx. 2 minutes. The display will automatically switch
back to the receive level indicator if no buttons are pressed. Any
settings you have made will also be saved.