Betriebsanleitung
Kapitel
5
IOLSHPB-P3104R01
2010-07-05
© SICK AG • Industrial Sensors • Deutschland • Irrtümer und Änderungen vorbehalten
11
Inbetriebnahme und Betrieb
Hierbei muss für die einzelnen Ports die entsprechende Betriebsart (SCAN-Mode) in den
globalen Parametern des Gerätes parametriert werden.
Parameter
Die Module „PD-PCP x words“ enthalten keine veränderbaren Parameter. Die Parameter
der anderen Module können entsprechend geändert werden.
Globale Parameter des Gerätes:
Betriebsart Port n
Digital Input (Default)
Port n ist ein digitaler Eingang.
Port n ist ein digitaler Ausgang.
Digital Output
a
WARNING
Es darf kein IOLD angeschlossen
werden!!
SCAN Mode
Port n versucht zyklisch eine IO-Link-Komm-
unikation aufzubauen. Wird ein IOLD
erkannt, wechelt der Port in den COM-Mode.
Zwischen den Kommunikationsversuchen
verhält sich der Port wie ein digitaler
Eingang.
SIO Input mit
IO-Link-Zugriff
Port n ist ein digitaler Eingang. Bei einem
Lese- oder Schreibzugriff seitens der Appli-
kation auf ein an diesem Port angeschlos-
senes IOLD wird versucht eine IO-Link-
Kommunikation aufzubauen. Wird ein IOLD
erkannt, wird der Zugriff abhängig von der
parametrierten IOLD-ID durchgeführt. Wird
kein IOLD erkannt, werden die Kommunika-
tionsversuche nach ca. 5 Sekunden
abgebrochen.
Kennungsbezogene Diagnose
freigeben (Default)
Kennungsbezogene Diagnose ist aktiv.
sperren
Kennungsbezogene Diagnose ist nicht aktiv.
Port-Status-Diagnose
freigeben (Default)
Modul-Status-Diagnose ist aktiv.
sperren
Modul-Status-Diagnose ist nicht aktiv.
Kanalgenaue Diagnose
freigeben (Default)
Kanalgenaue Diagnose ist aktiv.
sperren
Kanalgenaue Diagnose ist nicht aktiv.
IOL-Status-Meldungen-Diagnose
freigeben (Default)
IOL-Status-Meldungen-Diagnose ist aktiv.
sperren
IOL-Status-Meldungen-Diagnose ist nicht
aktiv.
IOLM-Diagnose
freigeben (Default)
Die Events des IOLD an Port n werden
quittiert und in der PROFIBUS-Diagnose
abgebildet.
sperren
Die Events des IOLD an Port n werden nur
quittiert.