![background image](http://html1.mh-extra.com/html/sick/io-link-master-iolg2ei-03208r01-ethernet-ip/io-link-master-iolg2ei-03208r01-ethernet-ip_operating-instructions-manual_1264554038.webp)
Operating instructions IO-Link Master IOLG2EI-03208R01 – EtherNet/IP™
Operation via the web server
38
© SICK AG • Presence Detection • Subject to change without notice • 8018483
8 Operation via the web server
8.1
General information
The IO-Link Master includes an internal web server.
You can use the web server to carry out the following tasks:
•
Call up detailed information on the current status of the IO-Link Master.
• Configure module addresses.
• Call up information about connected IO-Link devices.
• Configure connected IO-Link devices.
Make sure that the device is correctly integrated into the network. To set
up a connection with the web server, enter the IP address of the IO-Link
Master into the address bar in the browser. A welcome page appears.
Use the current version of Internet Explorer and deactivate the proxy server.
8.2
Views
The web server comprises the following views:
•
Welcome page
• Home
• Diagnostic process
• Device properties
• Diagnostic module
• Configuration
•
Contact