![background image](http://html.mh-extra.com/html/sick/inspectorp621/inspectorp621_operating-instructions-manual_1264196011.webp)
CAUTION
Optical radiation: Laser class 1
The accessible radiation does not pose a danger when viewed directly for up to 100
seconds. It may pose a danger to the eyes and skin in the event of incorrect use.
■
Do not open the housing. Opening the housing may increase the level of risk.
■
Current national regulations regarding laser protection must be observed.
CAUTION
Hazardous radiation.
If any operating or adjusting devices other than those specified here are used or other
methods are employed, this can lead to dangerous exposure to radiation. Damage to
the eyes is possible.
■
If the product is operated in conjunction with external illumination systems, the
risks described here may be exceeded. This must be taken into consideration by
users on a case-by-case basis.
■
Do not look into the light source when it is switched on.
■
Comply with the latest version of the applicable regulations on photobiological
safety of lamps and lamp systems as well as on laser protection.
For both radiation types:
It is not possible to entirely rule out temporary disorienting optical effects, particularly
in conditions of dim lighting. Disorienting optical effects may come in the form of daz‐
zle, flash blindness, afterimages, photosensitive epilepsy , depending on parameteriza‐
tion), or impairment of color vision, for
example.
CAUTION
Risk of injury due to hot device surface!
■
When performing work directly on the product (e.g. cleaning, disassembly), switch
off the device if necessary and allow it to cool down.
WARNING
Electrical voltage!
Electrical voltage can cause severe injury or death.
■
Work on electrical systems must only be performed by qualified electricians.
■
The power supply must be disconnected when attaching and detaching electrical
connections.
■
The product must only be connected to a voltage supply as set out in the require‐
ments in the operating instructions.
■
National and regional regulations must be complied with.
■
Safety requirements relating to work on electrical systems must be complied with.
WARNING
Risk of injury and damage caused by potential equalization currents!
Improper grounding can lead to dangerous equipotential bonding currents, which may
in turn lead to dangerous voltages on metallic surfaces, such as the housing. Electrical
voltage can cause severe injury or death.
■
Work on electrical systems must only be performed by qualified electricians.
■
Follow the notes in the operating instructions.
■
Install the grounding for the product and the system in accordance with national
and regional regulations.
SAFETY INFORMATION
2
8024439//2019-06 | SICK
O P E R A T I N G I N S T R U C T I O N S | InspectorP621
11
Subject to change without notice