10
Decommissioning
10.1
Decommissioning
Removing the sensor
1.
Switch off the supply voltage to the sensor.
2.
Detach all connecting cables from the sensor.
3.
If the sensor is being replaced, mark its position and alignment on the bracket or
surroundings.
4.
Remove the sensor from the slot.
Disposing of the sensor
Any sensor which can no longer be used must be disposed of in an environmentally
friendly manner in accordance with the applicable country-specific waste disposal regu‐
lations. The sensor is electronic waste and must under no circumstances be disposed
of with general waste.
DECOMMISSIONING
10
8026282/2021-05-26 | SICK
O P E R A T I N G I N S T R U C T I O N S | GLS100
41
Subject to change without notice
