7.5.5.7
Function block for optional light
The
Reset required
or
Restart required
output of the
Reset
or
Restart
function block provides
a frequency of 1 Hz to indicate that the function block is anticipating a valid reset or
restart pulse.
As the light can be controlled using both the
Safe Stop 1
function block and the
Safe Stop
2
function block, the ratio between pulse and pause would be random if
OR
were used.
Figure 39: View of function block for optional light
7.6
Contents of the motion control logic
1.
Move the mouse cursor to the
Logic editor
button.
2.
Click on
K110.1 - MOC0[1] - Logic editor
.
✓
The view opens. The page appears.
7.6.1
Position_Cross_Check page
Figure 40: Position_Cross_Check page view
This page is protected with a password and cannot be configured.
The purpose of this function block is to cross-check the speed.
7
CONFIGURATION
64
O P E R A T I N G I N S T R U C T I O N S | Safe Linear Positioning
8020941/12O9/2019-08-05 | SICK
Subject to change without notice
