manualshive.com logo in svg

SICK FLOWSIC600, Technical Information, Page: 57 / 262

Share
Download
SICK FLOWSIC600 Technical Information Download Page 57

Product Description

FLOWSIC600 · Technical Information · 8010125 V 4.0 · © SICK AG

57

Su

bj

ec

t t

o c

han

ge

 w

ith

ou

t n

ot

ic

e

Software features  

Main readings bar

Description

Meter Status

Window displaying the current Meter Status.

User Warnings

Window for the display of the User Warnings and for the configuration of the User 
Warning Limits and the Diagnostic Comparison Limits.

Key navigation

Description

Connect/Disconnect

Assistant for establishing online and offline connections between MEPAFLOW600 
CBM meter database and FLOWSIC600.

Diagnosis Session

Quick creation of session files for diagnostic purposes.

Data recorder

Tool for the recording and playback of current, future or cached readings.

DataLogs

Access to Hourly Log, Daily Log and Diagnostics Comparison data saved in the 
meter. Data can be exported to Excel. The Diagnostics Comparison Report can be 
printed or exported as PDF. 

Meter logbook

Access to meter logbook and logbook entries saved to meter database.

Information

Overview of higher level meter information:  Counter readings, identification and 
location of meter and display of readings (e.g. flow rate) in graph.

Meter values

Detailed diagnostic page with graphs for velocity of gas, speed of sound (SOS), 
path performance, AGC,  signal-to-noise-ratio (SNR), turbulence, profile symmetry 
and user selectable readings (e.g. flow rate). Summary of device status.

Maintenance report

Assistant for the creation of Maintenance reports.

Meter explorer

Overview, access and management of the meter database saved on the PC. 
Includes all meter data and sessions with entries for all changes of parameters, 
changes of the operating mode, measurement records (including diagnosis 
sessions) and maintenance reports. Functions for export, import, creation and 
deletion of meter data.

Go to Operation Mode / Go to 
Configuration Mode

Operation Mode switches:  "Operation Mode" for normal operation or 
"Configuration Mode" for writing information (i.e. parameters) to the meter.

Program settings

Access to program settings for the individual adjustment of the program 
appearance and setup  (e.g. settings for file path, memory, unit system and layout). 

Parameters

Access to all meter parameters. Assistant for comparing current parameter 
settings with previous ones.

Save cache

Saves the historical data from the PCs memory (cache) to a record. 

SOS Calculator

A theoretical SOS can be calculated for a specific gas composition.

Meter calibration

The calibration wizard guides the user through the calibration procedure with 
automated processes to write the information to the meter and generate reports.

Field setup

The field setup wizard guides the user through the commissioning procedure.

Firmware update

Assistant for installing firmware updates.

I/O check

The I/O check wizard guides the user through a test of all meter outputs.

Path diagnosis

Access to path diagnosis and graphs of received signals.

Report manager

Overview, access and management of all reports stored in the meter database. The 
report manager enables the creation of Trend reports from saved records and 
maintenance reports.

Summary of Contents for FLOWSIC600







































































































































































































































































Reviews:

No comments