manualshive.com logo in svg

SICK CLV63 Series, Operating Instructions Manual

Share
Download
SICK CLV63 Series Operating Instructions Manual Download Page 27

5

Mounting

5.1

Overview of mounting procedure

•

Selecting and preparing the mounting location.

•

Mounting the device.

•

Align device towards object with bar code.

•

Connect device to data cable and supply cable.

•

Adjust the device.

WARNING
Risk of injury due to damage to the device

For reasons of safety, a device which is visibly damaged must not be operated or must
be immediately taken out of operation. Damage includes, for example:

•

Housing: Cracked or broken

•

Reading window lens: Cracked or broken

•

Device with connector: Over-rotation of the connector, cracks, or being torn from
the housing

•

Device with fixed cable: Damage to the cable outlet or cable itself

5.2

Scope of delivery

The delivery of the device includes the following components:

Table 4: CLV63x–CLV65x: scope of delivery

No. of
units

Component

Notes

1

Device in the version ordered

Without bracket.

IP65 standard housing:

Ethernet variant:

•

M12 female connector sealed with
tightly screwed on protective plugs

•

Without connecting cables.

IP69K protective housing:

Both M12 connections sealed with tightly
screwed on protective plug or cap.
Without connecting cables.

1

Multilingual safety notes in a printed doc‐
ument

Informs about the requirements for safe
use of the product.

The delivery of the device in the IP69K protective housing includes the following addi‐
tional components:

MOUNTING 

5

8019588/129Z/2019-02-07 | SICK

O P E R A T I N G   I N S T R U C T I O N S | CLV63x, CLV64x, CLV65x

27

Subject to change without notice

Summary of Contents for CLV63 Series







































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands