![background image](http://html.mh-extra.com/html/sick/advanced-clv650/advanced-clv650_operating-instructions-manual_1264217023.webp)
Operating Instructions
Chapter
4
CLV65x Bar Code Scanner
Product description
8011980/0000/2009-04-21
©
SICK AG · Division Auto Ident · Germany · All rights reserved
23
4
Product description
This chapter describes the design, the features and the functions of the CLV65x bar code
scanner.
For installation, electrical installation and startup assistance as well as for the applica-
tion-specific configuration of the bar code scanner using the SOPAS-ET configuration
software, please read this chapter
prior
to carrying out any of the tasks.
4.1
Setting up the bar code scanner
The CLV65x bar code scanner consists of a laser scanner (laser diode and lens) with auto-
focus (can be switched off) and an electronic unit with an integrated decoder. The laser
scanner and electronic unit are located in a housing. The light exits and enters via a reading
window in the industrial-type housing. The bar code scanner (depending on the version) is
electrically connected by a cable with a connector or a revolving connector unit with two con-
nections.
For an adaption to on-site space conditions/reading functions two housings are available:
a housing with front reading window and a housing with oscillating mirror. Via the oscillating
mirror, the laser beam exits through the side reading window at an angle of emergence of
105°. This corresponds to the central position (default settings) of the laser beam perpen-
dicular to the scan direction.
4.1.1
Device view
Fig. 4-1:
Housing types of the CLV65x bar code scanner