Click to the selected preferred edge
In Process data, select
Width Measure‐
ment
and
Sensitivity
Fine
.
Selecting a window mode and set-points, you can set the tolerance window.
Within the Process data the width mea‐
surement is visible in reference to the
two selected edges. This value can be
measured with an analogue value as
well as a standard switching output.
4
GUIDE LINE DETECTION IN PRINT INDUSTRY
10
T E C H N I C A L I N F O R M A T I O N | AS30
8025153/2019-12-10 | SICK
Subject to change without notice
