background image

Electrical installation

The power supply must meet the specifications on the product.

The pump is intended to be used with either a weatherproof 
cable connector or permanently connected to the fixed wiring 
in the main system other than by means of a plug and socket.

The cores in the supply cable are coloured in accordance with the following
code:  

Brown = Live, Blue = Neutral, Green/Yellow = Earth.

The electric cable is permanently connected and sealed in the motor body.
If the supply cable is damaged the pump must not be used.

Do not use the supply cable to lift the pump as this may cause damage. 

WARNING - THIS PUMP MUST BE EARTHED

A Residual Current Device (RCD), also know as the Residual 
Current Circuit Breaker (RCCB), with a tripping current not 
exceeding 30mA must be installed in the supply circuit.

A means of disconnection from the supply having a contact separation
of at least 3mm in all poles must be incorporated in the fixed wiring.

INSTALLATION

For permanent installations to the mains supply, it is necessary to conform to
the regulations of the local electricity authority and this would include the use
of a metal or plastic conduit to protect the cable.

Attention has been drawn to the fact that special rules may exist concerning
the installation of your pond pump (i.e. local building regulations).

These pumps must not be used in swimming pools, or areas where people are
in contact with the water.

Always disconnect the mains electricity supply whilst the equipment is being
installed, repaired, maintained or handled.  Consult a qualified electrician if in
any doubt about wiring this product to the main supply.

Warning -

The Hydratech Multi pump is provided with a 

thermal cut out that temporarily switches off the pump in case 
of overheating and the pump may automatically restart.

6

7

Pump performance / flow chart

Technical Specification and Performance

GETTING TO KNOW YOUR HYDRATECH MULTI PUMP

CC

_

CC

_

CC

_

CC

_

CC

_

CC

_

HYDRATECH MULTI

800

1500

2500

3250

4000

6000

Cable Fitted

10m

10m

10m

10m

10m

10m

Voltage

230V

230V

230V

230V

230V

230V

Hertz

50Hz

50Hz

50Hz

50Hz

50Hz

50Hz

Watts

13

36

40

42

46

89

Safety Rating

IP68

IP68

IP68

IP68

IP68

IP68

Maximum Flow

790 

ltr/hr

1550 

ltr/hr

2750 

ltr/hr

3350 

ltr/hr

3800 

ltr/hr

5850 

ltr/hr

174 

gal/hr

341 

gal/hr

606 

gal/hr

737 

gal/hr

837 

gal/hr

1287 

gal/hr

Maximum Lift

1.25m

2.3m

3m

2.75m

3m

3.7m

4’1”

7’5”

9’8”

9’2”

9’8”

12’1”

Multi Instructions 3250 AW  23/3/06  10:23 am  Page 9

Summary of Contents for BLAGDON HYDRATECH MULTI 800









Reviews: