Aqua Timer Plus
-
24/34
6.5 – Remote Start
Aqua Timer Plus
offers a “remote start” entry which allows for the regeneration to be started up by an
external
automatism
or by a button placed at a distance from the system. Whichever device is used, it
normally open
type, and
to start up the regeneration it must be closed for at least 15 seconds.
The regeneration by remote start can start both immediately and deferred to the programmed time, depending on what is
programmed in the flag
2HL
.
6.6 – Programming of the litre counter divider ( prescaler )
The programming of the litre counter divider defines the ratio between the number of
impulses
read by
Aqua Timer
Plus
and
the unit of load
in transit in the counter used ( litres or m
³
) .
Aqua Timer Plus
has two work modes:
free prescaler
if the flag
0CP
is equal to
0
; in this case the prescaler may be programmed within the range of
values 1
899 (n° of impulses given by the litre counter before the volume climbs by one unit);
pre-programmed prescaler;
in this case the litre counter dividers which can be used are those indicated in the
first column of table 24;
Tab.24 – Table of the pre-programmed litre counter dividers
Type of litre counter divider (impulses / litre)
Representation on the display
14 / 01
1 4.0 1
4 / 1
0 4.0 1
1 / 1
0 1.0 1
4 / 10
0 4.1 0
2 / 10
0 2.1 0
1 / 10
0 1.1 0
4 / 100
4.1 0 0
2 / 100
2.1 0 0
1 / 100
1.1 0 0
4 / 1000
4.0 0 0
2 / 1000
2.0 0 0
1 / 1000
1.0 0 0
