- 71 -
In the IRQ Resources submenu, if you assign an IRQ to Legacy ISA,
then that Interrupt Request Line is reserved for a legacy ISA expansion
card. Press <Esc> to close the IRQ Resources submenu.
In the Memory Resources submenu, use the first item Reserved Memory
Base to set the start address of the memory you want to reserve for the
ISA expansion card. Use the second item Reserved Memory Length to
set the amount of reserved memory. Press <Esc> to close the Memory
Resources submenu.
"
The choice: Auto ( ESCD ) or Manual.
IRQ Resources
IRQ Resources
IRQ Resources
IRQ Resources
IRQ Resources
When resources are controlled manually, assign each system interrupt a
type, depending on the type of device using the interrupt.
PCI/VGA Palette Snoop (Disabled)
PCI/VGA Palette Snoop (Disabled)
PCI/VGA Palette Snoop (Disabled)
PCI/VGA Palette Snoop (Disabled)
PCI/VGA Palette Snoop (Disabled)
This item is designed to overcome problems that can be caused by
some non-standard VGA cards. This board includes a built-in VGA
system that does not require palette snooping so you must leave this
item disabled.
"
The choice: Enabled or Disabled.
Assign IRQ For USB (Enabled)
Assign IRQ For USB (Enabled)
Assign IRQ For USB (Enabled)
Assign IRQ For USB (Enabled)
Assign IRQ For USB (Enabled)
Names the interrupt request (IRQ) line assigned to the USB on your
system. Activity of the selected IRQ always awakens the system.
"
The choice: Enabled or Disabled.
INT Pin1~8 Assignment (Auto)
INT Pin1~8 Assignment (Auto)
INT Pin1~8 Assignment (Auto)
INT Pin1~8 Assignment (Auto)
INT Pin1~8 Assignment (Auto)
Names the interrupt request (IRQ) line assigned to a device connected
to the PCI interface on your system.
"
The Choice: Auto, 3, 4, 5, 7, 9, 10, 11, 12, 14, 15.
