- 33 -
-
$%
$%
$%
$%
$%
Other Connectors
ATX Power Supply Connector (ATX1 and ATX12V)
This motherboard uses 20-pin Pentium 4 standard ATX power header,
ATX1 and comes with another ATX12V headers.
Please make sure you plug in the right direction.
A traditional ATX system should remain at power off stage when AC power
resumes from power failure. In such case, if there is no an UPS to keep
power-on, the kind of design is inconvenient for a network server or worksta-
tion.
However, this motherboard implements an AC Power Auto Recovery
function to solve this problem. You may enable the function "PWRON After
PWR-Fail" that is under sub-menu of "Power Management Setup" through BIOS
setup program.
Note 1:
Note 1:
Note 1:
Note 1:
Note 1: The ATX power connector is directional and will not go in unless the guides
match perfectly making sure that pin#1 is properly positioned.
Note 2:
Note 2:
Note 2:
Note 2:
Note 2: Make sure the latch of the ATX power connector clicks into place to ensure a
solid attachment.
Note 3:
Note 3:
Note 3:
Note 3:
Note 3: Your ATX power supply must be supplied to ACPI +5V standby power and
at least 720mA compatible.
Note 4:
Note 4:
Note 4:
Note 4:
Note 4: Make sure your power supply have enough power for higher speed processor
installed.
ATX1
ATX12V
ATX 12V
ATX 1
