- 63 -
Init Display First (PCI Slot)
Init Display First (PCI Slot)
Init Display First (PCI Slot)
Init Display First (PCI Slot)
Init Display First (PCI Slot)
Use this item to specify whether your graphics adapter is installed in
one of the PCI slots or is integrated on the mainboard.
"
The choice: PCI Slot or Onboard /AGP .
IDE HDD Block Mode (Enabled)
IDE HDD Block Mode (Enabled)
IDE HDD Block Mode (Enabled)
IDE HDD Block Mode (Enabled)
IDE HDD Block Mode (Enabled)
If your IDE hard drive supports block mode (most new drives do), select
Enabled to automatic detect the optimal number of block read and
writes per sector that the drive can support and improves the speed of
access to IDE devices.
"
The choice: Enabled, or Disabled
POWER ON Function (Hot KEY)
POWER ON Function (Hot KEY)
POWER ON Function (Hot KEY)
POWER ON Function (Hot KEY)
POWER ON Function (Hot KEY)
Enable you to set power on paramenters. The default setting enables
you to use a hot key to turn on the system.
"
The choice: Password, Hot KEY, Mouse Left, Mouse Right, Any KEY,
Button Only, Keyboard 98.
KB Power ON Password (Enter)
KB Power ON Password (Enter)
KB Power ON Password (Enter)
KB Power ON Password (Enter)
KB Power ON Password (Enter)
When the POWER ON Function is set to Password, use this item to set
the password.
Hot Key Power ON
Hot Key Power ON
Hot Key Power ON
Hot Key Power ON
Hot Key Power ON ( Ctrl - F12 )
( Ctrl - F12 )
( Ctrl - F12 )
( Ctrl - F12 )
( Ctrl - F12 )
When the POWER ON Function is set to Hot KEY, use this item to set
the hot key combination that turns on the system.
"
The choice: <Ctrl-F5>,<Ctrl-F6>,<Ctrl-F7>,<Ctrl-F8>,
<Ctrl-F9>,<Ctrl-F10>,<Ctrl-F11>,<Ctrl-F12>
Onboard FDC Controller (Enabled)
Onboard FDC Controller (Enabled)
Onboard FDC Controller (Enabled)
Onboard FDC Controller (Enabled)
Onboard FDC Controller (Enabled)
This item specifices onboard floppy disk drive controller. This setting
allows you to connect your floppy disk drives to the onboard floppy
connector.
"
The choice: Enabled Disabled.
Onboard Serial Port1 (3F8/IRQ4)
Onboard Serial Port1 (3F8/IRQ4)
Onboard Serial Port1 (3F8/IRQ4)
Onboard Serial Port1 (3F8/IRQ4)
Onboard Serial Port1 (3F8/IRQ4)
This option is used to assign the I/O address and interrupt request ( IRQ
) for the onboard serial port1 ( COM1 ).
"
The choice: Disabled, 3F8/IRQ4, 2F8/IRQ3, 3E8/IRQ4, 2E8/IRQ3,
or Auto.
