- 43 -
Onboard Serial Port 1
This item is used to define onboard serial port 1 to
3F8/IRQ4, 2F8/IRQ3, 3E8/IRQ4, 2E8/
IRQ3, Auto
or
Disabled
.
Onboard Serial Port 2
This item is used to define onboard serial port 2 to
3F8/IRQ4, 2F8/IRQ3, 3E8/IRQ4, 2E8/
IRQ3, Auto
or
Disabled
.
UART Mode Select
The second serial port on your system may offer a variety of infrared port modes.
RxD, TxD Active
Consult your IR peripheral documentation to select the correct setting of the TxD and
RxD signals.
IR Transmittion delay
This item Enable / Disable the delay of the IR state change from Rx to Tx mode or Tx to
Rx mode.
Onboard Parallel Port
This item specifies onboard parallel port address to
378H, 278H, 3BCH
or
Disabled.
Parallel Port Mode
This item specifies onboard parallel port mode. The options are
SPP
(Standard Parallel
Port),
EPP
(Enhanced Parallel Port),
ECP
(Extended Capabilities Port), and
EPP+ECP.
ECP Mode Use DMA
This item specifies
DMA
(Direct Memory Access) channel when ECP device is in use.
The options are
DMA 1
and
DMA 3
.
This item will not show up when SPP and EPP
printer mode is selected.
EPP Mode Select
This item select the EPP mode, EPP 1.9 or EPP 1.7.
