19
K/B & PS/2 Mouse Power-On JP1
Keyboard &
PS/2 Mouse
Power-On
Disabled
PS/2 Mouse
Power-On
Enabled
Keyboard &
PS/2 Mouse
Power-On
Enabled
Figure 2-29
Figure 2-30
Clear CMOS - JP8
HOT-679 mainboard supports jumper
JP8
for discharging mainboard's CMOS memory.
This jumper can clear the CMOS data stored in the Giga I/O chip. To clear the CMOS data
please follow listed steps:
1) Turn off the PC,
2) Remove mini jumper from JP8 pin 1-2,
3) Insert mini jumper to JP8 pin 2-3 for a brief while,
4) Remove mini jumper from JP8 in 2-3,
5) Reinsert mini jumper to JP8 pin 1-2,
6) Turn on the PC.
Keyboard & PS/2 Mouse Power-On Setting - JP1
HOT-679 mainboard provides an optional power-on function by stroke any key (or hot-key)
on keyboard or double click on PS/2 mouse.
Note: Power-on by serial mouse is not supported
JP1 is the jumper used to set the functions of keyboard & PS/2 mouse power-on Enabled or
Disabled.
When you enabled K/B & PS/2 Mouse Power-ON function, you also have to set the proper
item on
POWER ON function
category of
Integrated Peripherals
of BIOS setup.
Table 2-4
