14
What does the Celeron™ Processor RM consist of
Retention Mechanism for Intel Celeron™ Processor
The Intel Celeron™ Processor requires Retention Mechanism (RM) to hold the base processor
in the Single Edge Processor Package (S.E.P.P). Contact your supplier for the mechanism.
The Retention Mechanism package consists of two separate sets of components.
Each set consists of two RM and two RMAM.
Retention Mechanism (RM) -
Two Plastic Guides that hold the S.E.P.P in the Slot 1
connector. (Refer to Figure 2-23)
RM Attach Mount (RMAM) -
Bolt/Bridge assembly inserted up through the.. bottom
of the mainboard, then secures the RM to RMAM
(two RMAM required per RM).(Refer to Figure 2-23)
Figure 2-23
Figure 2-24
Install the Celeron™ Processor RM
Place the mainboard on a workbench (not in a chassis). Be sure that the mainboard is bare
(that is, no DIMMs, cables, or cards are installed).
1.
Locate the Retention Mechanism (RM) Mounting Holes of Slot 1 on main board.
(Refer to Figure 2-24)
2.
Insert two Retention Mechanisms (RM) face to face on opposite sides of Slot 1.
(Refer to Figure 2-24)
3.
Screw the four captive nuts (Refer to Figure 2-24) on the RM with a screw driver to
ecure RM to two RMAMs.
