- 35 -
Passive Release
When enabled, the chipset provides a programmable passive release mechanism to meet
the required ISA master latencies.
Delayed Transaction
Since the 2.1 revision of the PCI specification requires much tighter controls on target and
master latency. PCI cycles to or from ISA typically take longer. When enabled, the
chipset provides a programmable delayed completion mechanism to meet the required
target latencies.
AGP Aperture Size (MB)
This item allows the user to set memory-mapped, graphics data structures can reside in
Graphics Aperture.
Auto Detect DIMM/PCI Clk
Enabling this item allosw system auto detect and close clock signal to empty DIMM/PCI
slot to reduce EMI.
Spread Spectrum
This item allows the user to enable Spread Spectrum Modulated to reduce the EMI.
CPU Host Clock
This item allows the user to adjust CPU Host Bus Clock from BIOS when JP10 is set to
Auto.
The user may adjust CPU Host Clock from 60 MHz to 83 MHz when 66 MHz based
Pentium II/III or Celeron processor is used, or from 100 MHz to 133 MHz when 100
MHz based Pentium II/III processor is used.
This item will not show up when JP10 is set to Manual.
CPU Clock Ratio
This item allows the user to adjust CPU Host Clock/Internal Clock ration when JP10 is
set to Auto.
The user may adjust CPU Clock Ratio from 2x to 5x.
This item will not show up when JP10 is set to Manual.
CPU Speed
This item is show only. when CPU Host Clock and CPU Clock Ratio is set, the result will
be display on this item.
