- 33 -
Chipset Features Setup
Auto Configuration
The default setting of the optional timings for items 3 through 7 for 60ns EDO DRAM
modules.
EDO DRAM Speed Selection
This item set the EDO DRAM Read/Write timings that the system uses. When item of
"Auto Configuration" is disabled, this item will not show up.
EDO CASx# MA Wait State
When enabled, one additional wait state is inserted before the assertion of the first
memory address line MA and CAS/RAS assertion during DRAM read or write leadoff
cycles.
EDO RASx# Wait State
The board designer may elect to insert one additional wait state before RASx# is asserted
for row misses, thus allowing one additional MAX [13:0] setup time to RASx# assertion.
This field applies only if EDO DRAM is installed in the system.
EDO RAS-To-CAS Delay
When EDO DRAM is refreshed, both rows and columns are address separately. This
setup item allows you to determine the timing of the transition from Row Address Strobe
(RAS) to Column Address Strobe (CAS). The options are 3 and 2.
