- 11 -
Install Pentium II/III Processor
Figure 2-10
Figure 2-11
Push the latches on the processor toward the center of the processor until they click into place.
Hold the processor so that the fan shroud is facing toward the Heat Sink Support Base bar on
the mainboard. Slide the processor into the Universal Retention Mechanism. Ensure that the
alignment notch in the processor fits over the plug in Slot 1. Push the processor down firmly,
with even pressure on both sides of the top, until it is seated.
Push the latches on the processor outward until they click into place in the Universal Retention
Mechanism. The latches must be secured for proper electrical connection of the processor.
Attach the end of the power cable to the three-pin connector on the mainboard or to the CPU
fan connector on the HOT-675Z.
