- 63 -
HDD Power Down
The IDE hard drive will spin down if it is not accessed within a specified
length of time. Options are from 1 Min to 15 Min and Disabled.
Ø
The choice: Disabled or 1 Min~15 Min.
HDD Down In Suspend
The item allows you to enable or disable the HDD Down In Suspend.
Ø
The choice: Enabled or Disabled.
Soft-Off by PBTN
Under ACPI you can create a software power down. In a software
power down, the system can be resumed by Wake UP Alarms.
Ø
The choice: Delay 4 Sec or Instant-Off.
PWRON After PWR-Fail
This item defines your computer to shut off or automatically restart.
Ø
The choice: Former-Sts, Off or On.
WOL(PME#) From Soft-Off
If this item sets to Enabled, the system power will be turned on when the
LAN port receives an incoming signal.
Ø
The choice: Enabled or Disabled.
WOR(RI#) From Soft-Off
If this item is enabled, it allows the system to resume from a software
power down or power-saving mode whenever there is an incoming call
to an installed fax/modem. You have to connector the fax/modem to
the mainboard.
Ø
The choice: Enabled or Disabled.
USB Resume from S3
If you are using USB devices, and the ACPI Suspend Type is set to S3 or
S1&S3, enable this item to have USB devices wake up the system from
power saving mode.
Ø
The choice: Enabled or Disabled.
Power-On by Alarm
When set to Enabled, the following four fields become available and
you can set the date, hour, minute and second to turn on your system.
Ø
The choice: Enabled or Disabled.
Day of Month Alarm
This item selects the alarm date.
[dd]
Ø
Key in a DEC number: Min=0, Max=31.
Time(dd : hh : mm) of Alarm
This item selects the alarm time.
[hh]
Ø
Key in a DEC number: Min=0, Max=23.
[mm]
Ø
Key in a DEC number: Min=0, Max=59.
[ss]
Ø
Key in a DEC number: Min=0, Max=59.
